Hello Guest it is May 08, 2021, 03:21:10 PM

Author Topic: New Hermes IS400 Volume  (Read 4005 times)

0 Members and 1 Guest are viewing this topic.

New Hermes IS400 Volume
« on: May 19, 2007, 01:18:54 PM »
Does anyone know if I can control a New Hermes IS400 Volume as a 4 Axis CNC machine?  Does the Mach 3 work on this machine?  If so, does anyone have the setup data for it.

Thank you,

Re: New Hermes IS400 Volume
« Reply #1 on: May 19, 2007, 11:13:55 PM »
You will have to dig to see if you can run it with Mach3... It looks like it is running on a DSP and they run step and direction
Fixing problems one post at a time ;)