Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: silvermine on May 19, 2007, 01:18:54 PM

Title: New Hermes IS400 Volume
Post by: silvermine on May 19, 2007, 01:18:54 PM

Does anyone know if I can control a New Hermes IS400 Volume as a 4 Axis CNC machine?  Does the Mach 3 work on this machine?  If so, does anyone have the setup data for it.

Thank you,

Ralph

Title: Re: New Hermes IS400 Volume
Post by: Brian Barker on May 19, 2007, 11:13:55 PM

You will have to dig to see if you can run it with Mach3... It looks like it is running on a DSP and they run step and direction