Thanks for the intrest Brian,,
I Built and Induction Heat Treat Scanner run by stepper motors,, Im sure the programing looks like childs play to you.
M3 turns on a dc motor that spins the part, M7 turns my induction heater on, and M9 turn the induction heater off, but what is happening is there is a momentary puse right when it shut my induction heater off,, witch really is not a big deal but the heated steel needs to get into the quench as quicky as posible, to become harden.
thanks
josh
M3
M7
G0 X-05.000 Y00.00000 Z00.00000
G0 X-08.000 Y00.00000 Z00.00000M9
G0 X 00.000 Y00.00000 Z00.00000
M30