Hello Guest it is December 13, 2019, 09:25:16 PM

Author Topic: Really need help reconfiguring our Morbidelli Author 503 Dado Motor.  (Read 1582 times)

0 Members and 1 Guest are viewing this topic.

Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
We had the infamous battery issue and lost everything. So starting from scratch and we are almost back to where we were at except we can't get the dado motor to turn and cut on the Y plane. It is setup as tool #80 & #81. It cuts fine in the X plane but it won't turn to cut in the Y axis.

Please any help would be greatly appreciated!!!

Kind Regards,

Rick

Offline Tweakie.CNC

*
  • *
  •  8,022 8,022
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
« Reply #1 on: March 31, 2016, 02:03:55 AM »
Have you converted your Author 503 to operate with Mach3 ?

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
« Reply #2 on: March 31, 2016, 10:15:46 AM »
No we haven't.

Can you tell me more about this?

Rick

Offline ger21

*
  • *
  •  6,291 6,291
    • View Profile
    • The CNC Woodworker
Re: Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
« Reply #3 on: March 31, 2016, 01:43:41 PM »
You need to find someone extremely familiar with that machine, and there probably are very few of those in the world.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html