Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: rkdelta on March 30, 2016, 05:30:00 PM

Title: Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
Post by: rkdelta on March 30, 2016, 05:30:00 PM

Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
We had the infamous battery issue and lost everything. So starting from scratch and we are almost back to where we were at except we can't get the dado motor to turn and cut on the Y plane. It is setup as tool #80 & #81. It cuts fine in the X plane but it won't turn to cut in the Y axis.

Please any help would be greatly appreciated!!!

Kind Regards,

Rick

Title: Re: Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
Post by: Tweakie.CNC on March 31, 2016, 02:03:55 AM

Have you converted your Author 503 to operate with Mach3 ?

Tweakie.

Title: Re: Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
Post by: rkdelta on March 31, 2016, 10:15:46 AM

No we haven't.

Can you tell me more about this?

Rick

Title: Re: Really need help reconfiguring our Morbidelli Author 503 Dado Motor.
Post by: ger21 on March 31, 2016, 01:43:41 PM

You need to find someone extremely familiar with that machine, and there probably are very few of those in the world.