Hello Guest it is March 29, 2024, 05:45:41 AM

Author Topic: having ref all probleme can anyone help me out  (Read 4664 times)

0 Members and 1 Guest are viewing this topic.

Re: having ref all probleme can anyone help me out
« Reply #10 on: March 28, 2016, 06:53:09 PM »
You Where saying   
 that 066 si in bas shape si what version should  i download

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: having ref all probleme can anyone help me out
« Reply #11 on: March 29, 2016, 03:28:18 AM »
Ok, well if it is reaching the switch and not triggering an E-Stop then it must be backing off until the switch has again closed. It may just be that the switch is sensitive and you do not physically see the backoff.

You will find 062 here
ftp://anonymous:guest@machsupport.com/Mach3/Mach3Version3.043.062.exe

Hood
Re: having ref all probleme can anyone help me out
« Reply #12 on: March 29, 2016, 06:28:41 AM »
That is the version i am using right know. some one esle had suggested me that. With that version i can at least ref my x and y but the z not yet.
i tried yesterday to check programing did the set set up again distance travelled. when i shut it down it ask me to save fixtures i said yes. today i will try to ref all to.
My question  today is about the distant traveling back.
the z should you place  -2 in the home off since its travelling away

Offline Mogal

*
  •  76 76
    • View Profile
Re: having ref all probleme can anyone help me out
« Reply #13 on: March 29, 2016, 03:14:07 PM »
Can you trigger the limit switch with your finger to verify the limit is in fact working?

One other thing I had to do, was increase the debounce on my system to 250 to allow the switch time to reset during the ref command.
(Not sure is thats the right thing to do, but it allowed the system to work correctly)
Re: having ref all probleme can anyone help me out
« Reply #14 on: April 16, 2016, 05:14:06 PM »
Hello
 i redid a profile
it seems to work a bit better but still having probleme with x home
the picture in the machine window seem to be up side down
They seem to p^rint mirrow