Purchased these two items. The manual control box seemed like much easier way to control 4 axis small mill I have. Works Great in jog. When I execute a G code program, it begins OK. At a random G code block, X or Y or both, will slowly begin jogging while program continues to execute. Must RESET to avoid a wreck. It like the DDSM6 is requesting a jog at same time the G code continues to execute. PC is Gateway notebook LT400u running Windows 7 pro. No other USB ports in use. I go into Windows CONTROL PANEL and SERVICES; STOP all auto update services. Same fault.
ANY HELP OR THOUGHTS WILL BE GREATLY APPRECIATED!!!
Purchased Mach4 rev 66 about year ago and a SMART STEPPER which was working great. I removed DDSM6 and reconnected SMART STEPPER. Mill runs perfectly, but harder to use without manual control box.