Hello Guest it is October 05, 2024, 12:11:23 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: jog keys overrun  (Read 2462 times)

0 Members and 1 Guest are viewing this topic.

Offline sculler

*
  • 2 2
jog keys overrun
« on: February 16, 2016, 07:01:03 AM »
Hi using the jog keys to set an origin on my second hand gerber. I find that the machine continues travelling (decelerating) along the X or Y when I have stopped pressing the arrow keys. How do I stop this happening as it makes setting a consistent origin almost impossible?  I have no home switches so cannot us an offset. Many thanks
Logged

Offline Tweakie.CNC

*
  • *
  • 9,232 9,232
  • Super Kitty
Re: jog keys overrun
« Reply #1 on: February 16, 2016, 07:06:54 AM »
It sounds as though your Acceleration settings are too low (Config / Motor Tuning).

Tweakie.
Logged
PEACE

Offline engraversoflight

*
  • 101 101
Re: jog keys overrun
« Reply #2 on: February 16, 2016, 08:00:24 AM »
Use MDI to make the machine move where you want it.

Also in the past I've experienced stuck keyboard keys.  that's annoying.
Logged

Offline Overloaded

*
  • *
  • 4,922 4,922
Re: jog keys overrun
« Reply #3 on: February 16, 2016, 08:36:27 AM »
I agree with Tweakie. Probably room for adjustment there.

You can also use the Jog Increments of 1,.01, .01, ..001 once you get near to your destination.

Russ
« Last Edit: February 16, 2016, 08:38:33 AM by Overloaded »
Logged

Offline sculler

*
  • 2 2
Re: jog keys overrun
« Reply #4 on: February 16, 2016, 02:40:30 PM »
hi
Many thanks, problem solved
Logged
Pages: 1   Go Up
« previous next »