Hello Guest it is December 07, 2019, 11:26:39 AM

Author Topic: Fusion 360  (Read 3589 times)

0 Members and 1 Guest are viewing this topic.

Offline dude1

*
  •  1,253 1,253
    • View Profile
Re: Fusion 360
« Reply #10 on: February 15, 2016, 06:23:11 PM »
got it I will put a vid up tonight will do from center out. center hole, pockets, 3D contour then cut out
« Last Edit: February 15, 2016, 06:26:00 PM by blockhead »

Offline dude1

*
  •  1,253 1,253
    • View Profile
Re: Fusion 360
« Reply #11 on: February 16, 2016, 04:07:33 AM »
found the problem with your model it was a tricky one to fix, what was wrong was the spokes and rim had become disjointed, this was what was stopping you from being able to do the tool path's required.

what I had to do was put the model and sketches into a component first this is something you should do, have a look at my youtube vids I did one on doing components https://www.youtube.com/channel/UCuKkujqPgtKixzAdFDHjzJA

the second thing I did was change the size of the inner circle from 34 mm to 33.5 mm and set the tool paths, once's I did that I changed the circle back to 34 mm and regend the tool paths and it was all good.