Author Topic: How I build my simple spring loaded drag engraves. Fits collet  (Read 1362 times)

0 Members and 1 Guest are viewing this topic.

Offline fixittt

  • Active Member
  • Posts: 277
    • View Profile
How I build my simple spring loaded drag engraves. Fits collet
« on: January 28, 2016, 10:23:44 AM »
I have had alot of people ask about the drag engravings that I do, so I made one that will fit a collet, Took some crappy pictures along the way.  Tossed them into a crappy video and here you go.  Simple yet very effective.

https://youtu.be/4qLc_jAR5ks

Here it is doing a bit of work.

https://youtu.be/tcOKVlcnoiM