Machsupport Forum

General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: fixittt on January 28, 2016, 10:23:44 AM

Title: How I build my simple spring loaded drag engraves. Fits collet
Post by: fixittt on January 28, 2016, 10:23:44 AM

I have had alot of people ask about the drag engravings that I do, so I made one that will fit a collet, Took some crappy pictures along the way.  Tossed them into a crappy video and here you go.  Simple yet very effective.

https://youtu.be/4qLc_jAR5ks

Here it is doing a bit of work.

https://youtu.be/tcOKVlcnoiM