Also, your motor tuning Steps Per is set way to high.
For the steps per for X and Y try 640. If it moves to much then half that. I say that because I done remember if I made my 3040 router XML file I have with 1.9 degree steppers or .8 steppers that are twice the resolution.
For Z try 800 or half that.
Velocity start with 1000 as your set in metric. Accel slide the slider 3/4`s the way to the right. Remember that when you make a change in one axis of the motor tuning YOU MUST CLICK THE "SAVE AXIS SETTINGS" BUTTON before going to the next axis.