Hello Guest it is October 18, 2021, 12:13:20 AM

Author Topic: Offsets strange behaviour  (Read 1105 times)

0 Members and 1 Guest are viewing this topic.

Offsets strange behaviour
« on: January 23, 2016, 02:34:40 PM »
I have G55 offsets set to X+2.000 and Y+2.000...when I select G55, the DROs show -2 on X and Y as expected...if I then go to zero (G0 Y0X0) it moves to .0061 on both axis, and when I check the machine position, it shows 1.9939...I am not currently hooked to any drives, is this a function of the motor settings? Like it cant decel in time? Seems strangwe to me...

Thanks
Leslie

Offline ger21

*
  • *
  •  6,293 6,293
    • View Profile
    • The CNC Woodworker
Re: Offsets strange behaviour
« Reply #1 on: January 23, 2016, 03:39:34 PM »
It's a function of your steps/unit.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html