Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: leversole on January 23, 2016, 02:34:40 PM

Title: Offsets strange behaviour
Post by: leversole on January 23, 2016, 02:34:40 PM

I have G55 offsets set to X+2.000 and Y+2.000...when I select G55, the DROs show -2 on X and Y as expected...if I then go to zero (G0 Y0X0) it moves to .0061 on both axis, and when I check the machine position, it shows 1.9939...I am not currently hooked to any drives, is this a function of the motor settings? Like it cant decel in time? Seems strangwe to me...

Thanks
Leslie

Title: Re: Offsets strange behaviour
Post by: ger21 on January 23, 2016, 03:39:34 PM

It's a function of your steps/unit.