Hello Guest it is March 28, 2024, 02:44:33 PM

Author Topic: LCam pro turn problem  (Read 9849 times)

0 Members and 1 Guest are viewing this topic.

LCam pro turn problem
« on: May 12, 2007, 05:35:16 PM »
Hi guy's
Chip attached is the profile i have made anad then tried to get Lcam to create the profile to turn, the program still creates the profile with the tool to the right then makes a diagnal move through the billit and then starts to cut the profile all in one pass and ends with a part cut off.
please let me know what you think.

Rg's
Dennis

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: LCam pro turn problem
« Reply #1 on: May 12, 2007, 08:39:07 PM »
Hi, Dennis

Take a look at this.

Thanks, Chip
Re: LCam pro turn problem
« Reply #2 on: May 13, 2007, 01:20:19 PM »
Hey Chip
Just downloaded the file how you do that? looks like it's supposed to what did i do wrong.

Rg's
Dennis
Re: LCam pro turn problem
« Reply #3 on: June 11, 2007, 05:35:43 PM »
Any body know how to turn off turn offsets

Wes
Have a nice Day
Re: LCam pro turn problem
« Reply #4 on: June 15, 2007, 01:07:25 PM »
Here is the DXF file if that helps
Have a nice Day
Re: LCam pro turn problem
« Reply #5 on: June 18, 2007, 04:34:23 PM »
Art here is the pics
Wes
Have a nice Day

Offline ART

*
  • *
  •  1,702 1,702
  • Tough as soggy paper.
    • View Profile
Re: LCam pro turn problem
« Reply #6 on: June 18, 2007, 09:19:14 PM »
Wes:

  That DXF doesnt seem to be the right one, I cant even perform the convert funtion on it, seems to have ataper in it too?

Art
Re: LCam pro turn problem
« Reply #7 on: June 18, 2007, 10:32:02 PM »
sorry here is the correct one.   I did figure out what was causing it though.  it does this when you input a tip radius of 0.00000.

Wes
Have a nice Day

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: LCam pro turn problem
« Reply #8 on: June 24, 2007, 12:28:51 AM »
Hi, Dennis

Take a look at this file, still needs some work. BabCad ver.18.

Just a start, Chip
« Last Edit: June 24, 2007, 03:03:12 PM by afn09556 »

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: LCam pro turn problem
« Reply #9 on: June 24, 2007, 10:16:08 PM »
Hi Dennis

Did you try the file

Chip