Hello Guest it is November 22, 2019, 07:53:36 AM

Author Topic: set delay for spindle spin up  (Read 1305 times)

0 Members and 1 Guest are viewing this topic.

set delay for spindle spin up
« on: January 16, 2016, 12:42:42 PM »
Where in mach3 can you set a delay that delays the g-code from running until the spindle is up to speed. 6 sec or 7 sec , or do you have to do it in the g-code.

Thanks
Re: set delay for spindle spin up
« Reply #1 on: January 16, 2016, 01:43:57 PM »
Got it I had tried it before but it didn't seem to work.