Hello Guest it is December 07, 2019, 07:04:19 PM

Author Topic: help with tapping please  (Read 2489 times)

0 Members and 1 Guest are viewing this topic.

Offline Biz

*
  •  6 6
    • View Profile
help with tapping please
« on: May 11, 2007, 03:21:15 AM »
 Hi everybody,
                   I am new to MACH3. I have used NCCAD7 for my wabeco ccf1210 high speed mill and have recently changed to a controller for MACH3.
I have one question: I am trying to do a base plate for my mill. I need a subroutine that : turns on spindle CW   . Gives instruction for a z depth at a given feedrate.Then stops the spindle. Then spindle CCW and z up with the same feed. Is that possible with Gcode without having to write the routine 100 times?(I need to drill 100 holes-threads at a given rectangular grid)
   Can anybody help?

 Best regards,

                   Biz

Offline Graham Waterworth

*
  • *
  •  1,916 1,916
  • Yorkshire Dales, England
    • View Profile
Re: help with tapping please
« Reply #1 on: May 11, 2007, 12:22:46 PM »
Without engineers the world stops

Offline Biz

*
  •  6 6
    • View Profile
Re: help with tapping please
« Reply #2 on: May 11, 2007, 01:52:44 PM »
Have a look at this post :-

http://www.artsoftcontrols.com/forum/index.php?topic=310.10

Graham.

Thanks for the help, I really apreciate it.
 Best regrds,
 Biz
Re: help with tapping please
« Reply #3 on: July 09, 2007, 10:02:33 AM »
Hello all. New to this. I also have a 1210 with the KOSY software and was thinking of changing to MACH3 as I do not find the KOSY much fun. What was involved?
Jeff