Hello Guest it is August 18, 2019, 10:08:54 PM

Author Topic: Crimping DB-9 Pins, Sockets & Tool  (Read 944 times)

0 Members and 1 Guest are viewing this topic.

Offline kolias

*
  •  1,011 1,011
    • View Profile
Crimping DB-9 Pins, Sockets & Tool
« on: November 27, 2015, 04:16:26 PM »
Never had a good success soldering the DB-9 connectors for the G540 so this time I will try crimping. Some vendors sell these cables with the DB-9 attached but the shipping cost + Duties / taxes to Canada will make them too expensive. In addition I prefer to have my cables to the required length instead of having coils of extra cables hanging all over my cnc

Anyone knows where I can get all the parts including a half decent crimping tool?


Nicolas

Offline kolias

*
  •  1,011 1,011
    • View Profile
Re: Crimping DB-9 Pins, Sockets & Tool
« Reply #2 on: November 28, 2015, 08:24:32 AM »
Thanks Peter, That's what I was looking for
Nicolas