Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: kolias on November 27, 2015, 04:16:26 PM
-
Never had a good success soldering the DB-9 connectors for the G540 so this time I will try crimping. Some vendors sell these cables with the DB-9 attached but the shipping cost + Duties / taxes to Canada will make them too expensive. In addition I prefer to have my cables to the required length instead of having coils of extra cables hanging all over my cnc
Anyone knows where I can get all the parts including a half decent crimping tool?
-
Hi,
This is the one I have;
http://www.digikey.com/product-search/en/tools/crimpers-applicators-presses/1245292?k=a9990-nd
http://www.digikey.com/product-search/en/connectors-interconnects/contacts-multi-purpose/1442675?k=a1008-nd
http://www.digikey.com/product-search/en/connectors-interconnects/contacts-multi-purpose/1442675?k=a1009-nd
Cheers,
Peter
-
Thanks Peter, That's what I was looking for