Hello Guest it is April 19, 2024, 02:16:17 AM
Profile Guest
« previous next »
Pages: « 1 2   Go Down

Author Topic: Calibration/Steps per unit sanity check  (Read 3816 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  • 7,427 7,427
    • View Profile
Re: Calibration/Steps per unit sanity check
« Reply #10 on: November 02, 2015, 03:24:44 PM »
If you just did as instructed the steps per would have been set correctly.
That said calculated based on correct inputs should be darn close to calibrated.

RICH
Logged

Offline iphillips

*
  • 24 24
    • View Profile
Re: Calibration/Steps per unit sanity check
« Reply #11 on: November 02, 2015, 08:17:37 PM »
I did and once using the correct info it works perfectly!
Thanks for your time Rich and everyone.
Also, I used your xls sheet to double check my calcs (Rich). Thanks again!

Logged
Pages: « 1 2   Go Up
« previous next »