Hello Guest it is March 28, 2024, 06:30:34 AM

Author Topic: Z-Axis Height Between Parts  (Read 1666 times)

0 Members and 1 Guest are viewing this topic.

Z-Axis Height Between Parts
« on: October 18, 2015, 03:01:33 PM »
Hello,

New member, fairly new to mach. Anyway, I am using Mach3 to run a plasma table and Sheetcam to generate my gcode. On thing that I have been unable to figure out is how to set the z-axis (torch height) between parts. If I have multiple parts (or times when the torch stops and moves before restarting) I would like to increase the height when it moves between cuts.

Can anyone tell me where I can set this? Is it in Mach or Sheetcam?

Thanks!

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Z-Axis Height Between Parts
« Reply #1 on: October 18, 2015, 04:47:37 PM »
In Sheetcam goto Job Options and on the material page set the SET RAPID HEIGHT to whatever you want it to be.

(;-) TP
Re: Z-Axis Height Between Parts
« Reply #2 on: October 18, 2015, 06:14:49 PM »
Awesome, I'll give that a shot!