Hello Guest it is September 21, 2019, 10:43:33 AM

Author Topic: One of the Y motors is not running when I reference all home  (Read 1097 times)

0 Members and 1 Guest are viewing this topic.

One of the Y motors is not running when I reference all home
« on: October 15, 2015, 06:56:52 PM »
Right now I am very angry with my CNC machine! When I Reference all home my left side motor is not moving at all. However, when I use the arrow keys to move the y axis the motor runs. I have checked all of the wires, and they're all fully in place. As such, I think it's the code but I have no idea how to fix it. The router was working Tuesday and now I'm confused about why it's not working now. Please help soon!
Re: One of the Y motors is not running when I reference all home
« Reply #1 on: October 17, 2015, 12:29:15 AM »
What CNC machine you are using right now i mean CNC Piranha, Industrial Grade 3x, Othermill Compact or CNC Touch Probe ?

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: One of the Y motors is not running when I reference all home
« Reply #2 on: October 17, 2015, 07:16:59 AM »
Assuming it's a slaved axis, and you have no Y axis home switch, make sure that "Home Slave with Master" is checked in General Config.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: One of the Y motors is not running when I reference all home
« Reply #3 on: October 20, 2015, 05:07:08 PM »
I have an EzRouter.
Re: One of the Y motors is not running when I reference all home
« Reply #4 on: October 20, 2015, 05:12:47 PM »
Fixed it. Thank you Guys! You're a real life saver!