Hello Guest it is November 14, 2019, 11:11:27 AM

Author Topic: z axis not working  (Read 1102 times)

0 Members and 1 Guest are viewing this topic.

z axis not working
« on: October 03, 2015, 11:43:49 AM »
hi all, all new to this , but have a problem with z axis, it only moves down, tried altering in ports and pins but no change, it worked fine on other days, am i doing something wrong or am i not doing something i should be.
Re: z axis not working
« Reply #1 on: October 05, 2015, 07:22:51 AM »
Loose dir wire?  Happened to me once.
Don
Re: z axis not working
« Reply #2 on: October 18, 2015, 08:07:06 AM »
ok, so what and where is the "dir wire"
Re: z axis not working
« Reply #3 on: October 18, 2015, 09:06:05 AM »
Direction wire. Either on the break out board or at the drive.
Don