Hello Guest it is December 07, 2019, 06:49:39 PM

Author Topic: How to make Mach3 jump up uppn pressing ESC  (Read 1276 times)

0 Members and 1 Guest are viewing this topic.

How to make Mach3 jump up uppn pressing ESC
« on: June 02, 2015, 12:17:43 AM »
sometimes, when a problem is detected while milling, i have to stop the milling.
when pressing the ESC button, the spindle just stops and stays buried inside the material.
is there a way to make it move up (in Z) for 10-20mm automatically after pressing the ESC button ?

Sincerely, Guy.

Offline BR549

*
  •  6,916 6,916
    • View Profile
Re: How to make Mach3 jump up uppn pressing ESC
« Reply #1 on: June 02, 2015, 12:45:21 AM »
Set up your safe Z setting to what you want.

(;-) TP
Re: How to make Mach3 jump up uppn pressing ESC
« Reply #2 on: June 02, 2015, 12:48:48 AM »
thanks. i appreciate it.