Hello Guest it is November 21, 2019, 02:37:57 PM

Author Topic: optimum kontroller IV  (Read 6430 times)

0 Members and 1 Guest are viewing this topic.

Re: optimum kontroller IV
« Reply #10 on: April 10, 2017, 10:09:54 AM »
maybe it will be quicker to email me,
Re: optimum kontroller IV
« Reply #11 on: January 03, 2019, 06:02:52 AM »
i am using controller VI ver 2, with mach3
i any want the setup i can help.


Hi Gert,

Could you please help with the settings for Mach3

Thank you

Hello Gert

I've bought a BF 46 mill with the Optimum supplied cmc steppers and controller IV. How could you share your setup with me?
I'm from SA, but living in Perth Australia for past 10 years.
Your help will be very welcome.

Re: optimum kontroller IV
« Reply #12 on: January 04, 2019, 01:14:33 AM »
Hi Gert

Yes, I do need help and would appreciate it if you could find the time to help.

My machines are a bf46vario converted to cnc(factory fitted ballscrews) with a controller IV. I also have a TU2708 vario lathe with the same cnc setup, however i’m contemplating using the same controller for the lathe.

I’ve setup my sherline machines about 5 years ago and have been using them, but bigger is always better so went for Optimum.

I’m not sure exactly what to ask for from you as I suppose its the setup within Mach3 which need to be configured, but if you have that information I would appreciate it.

If you need to know more from my side let me know.

Best Regards