Hello Guest it is February 05, 2023, 08:53:46 AM

Author Topic: Presetting tool lengths to tool table  (Read 3367 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

  •  6,965 6,965
    • View Profile
Presetting tool lengths to tool table
« on: May 07, 2015, 12:12:08 PM »
For those that wish to preset your tool lengths in the tool table here is a simple function for that. It makes use of a standard 1024 screenset . The PDF explains how to implement it as well as giving the needed button script.  It is simple to implement.

(;-) TP

Offline RICH

  • *
  •  7,428 7,428
    • View Profile
Re: Presetting tool lengths to tool table
« Reply #1 on: May 07, 2015, 08:19:05 PM »
Hi Terry,
Added it to  a screen in the VMR Lathe set but have not had time to test it out.
Need to do some mod's to the controller box.
Did other changes and added a calc page....good grief .......it doesn't end, but, having fun though.

Refrigerator is fixed, two pc's are fixed and twice at that, car is fixed, etc etc....called a Dog's Day Week! ::)