Hello Guest it is January 21, 2022, 05:41:46 PM

Author Topic: Wizard to integrate DeskEngrave to Mach3 via a wizard  (Read 3576 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

*
  •  6,951 6,951
    • View Profile
Wizard to integrate DeskEngrave to Mach3 via a wizard
« on: May 11, 2015, 07:10:10 PM »
Here is a Wizard that CALLS Deck Engrave fro inside of Mach3. When called you can create a Gcode file from any TTF font on you system after you save it will auto load the File into Mach3 for you to work with.

You must have DeskEngrave for this to work and you must save the gcode file to the Mach3 Gcode Directory.

To install Unzip the file and copy the directory to the Mach3\addons directory

(;-)TP
Re: Wizard to integrate DeskEngrave to Mach3 via a wizard
« Reply #1 on: May 11, 2015, 07:15:03 PM »
MUCHAS GRACIAS  ;D

Offline BR549

*
  •  6,951 6,951
    • View Profile
Re: Wizard to integrate DeskEngrave to Mach3 via a wizard
« Reply #2 on: May 12, 2015, 10:52:57 AM »
Here is the Wizard screen