I have a csmio/ip-a i can not get it to communicate . I run firmware uploader it says " no device found " .when i click on plug in comtrol in mach3 it says "csmio not connected. i have it connected direct to the computer with the crossover cable. there is nothing connected to the csmio except cable and the power. i turned the power on then waited to connect the cable , but i get the same thing.I have spent more time then i want trying to get this to work .the computer is not connected to the net , but i brought it in from the shop to download thefirmware and Microsoft NetFramework 3.5 . ithis thing is about to end up in a corner .