Hello Guest it is March 28, 2024, 06:11:57 PM

Author Topic: ESS and Mach4 Setup  (Read 15968 times)

0 Members and 1 Guest are viewing this topic.

Offline DazTheGas

*
  •  778 778
  • DazTheGas
    • View Profile
ESS and Mach4 Setup
« on: April 20, 2015, 03:32:47 AM »
Hi,

For those like me who could not find much info on the setup i have created a video of my Ox build.

The first part explains the setup of Mach4 with the ESS.

https://youtu.be/HIE0k6mu2yc

Enjoy....

New For 2022 - Instagram: dazthegas

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: ESS and Mach4 Setup
« Reply #1 on: April 20, 2015, 04:41:37 AM »
Absolutely excellent job Daz - I am looking forward to part II (and more please).

Tweakie.
PEACE
Re: ESS and Mach4 Setup
« Reply #2 on: April 20, 2015, 06:03:25 AM »
Great Stuff !!!!!  Thanks for posting  ;D


pete

Offline DazTheGas

*
  •  778 778
  • DazTheGas
    • View Profile
ESS and Mach4 Setup
« Reply #3 on: April 23, 2015, 06:21:38 PM »
Finally Part 2 finished setting up the Y and Z axis with a slave on the Y axis.

Part 2 Here

Working on 3rd.. ;)
New For 2022 - Instagram: dazthegas
Re: ESS and Mach4 Setup
« Reply #4 on: April 24, 2015, 09:27:57 PM »
Awesome!

Offline DazTheGas

*
  •  778 778
  • DazTheGas
    • View Profile
Re: ESS and Mach4 Setup
« Reply #5 on: April 25, 2015, 12:06:57 PM »
Part 3 now complete, contains the setup of limit switches, homing and software limits.

Part 3 Here

Enjoy
New For 2022 - Instagram: dazthegas
Re: ESS and Mach4 Setup
« Reply #6 on: April 26, 2015, 04:17:57 PM »
thanks for this. I was loosing hair because of that A0 at the end of part 2.. I now have mach4 moving correctly. Still need to figure out sharing of switches as I have X-- and X++ sharing a pin as well as Y and Z. Then there's the spindle. I have it starting up, but there is something definitely wrong. It's surging higher and higher in speed.

Offline dude1

*
  •  1,253 1,253
    • View Profile
Re: ESS and Mach4 Setup
« Reply #7 on: April 26, 2015, 05:36:31 PM »
try set the speeds x2 of what they are meant to be with Darwin to get 10000 rpm I had to have set to 100000 to get 10000 rpm also remove M3, M4, M5 for some reason they can muck up the spindle control.
Re: ESS and Mach4 Setup
« Reply #8 on: April 27, 2015, 02:20:31 PM »
Thanks for the videos DazTheGas. Extremely helpful and informative.
Re: ESS and Mach4 Setup
« Reply #9 on: May 01, 2015, 02:08:10 PM »
Outstanding set of videos, I found these extremely useful, ran across several issues your videos answered very clearly.  THANK YOU

Russ
 :D