Hello Guest it is March 28, 2024, 10:15:36 AM

Author Topic: G code editor  (Read 2304 times)

0 Members and 1 Guest are viewing this topic.

Offline PSL

*
  •  7 7
    • View Profile
G code editor
« on: March 29, 2015, 03:39:36 PM »
My computer crashed and I am trying to get everything up and running. I need to access the G code editor and change my system settings. I found what I need to change in the system but I am locked out. I cannot access the editor to change the system. Does anyone know how I can access the change? Any help would be great. Thank you.

Offline PSL

*
  •  7 7
    • View Profile
Re: G code editor
« Reply #1 on: March 29, 2015, 05:51:51 PM »
I was able to get the gen config section taken care off. I am still unable to edit G codes. The program just regenerates itself and the green start cycle button lights up. Does anyone have any ideas on how I can edit G codes?

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: G code editor
« Reply #2 on: March 29, 2015, 07:11:58 PM »
CONFIG>GENERAL CONFIG
Under Editor click the browse button and define where the editor exe file is located. ie;C:\notepad.exe
Save your settings.

Make sure when you use the editor that you save your changes to the gcode file.

RICH
Re: G code editor
« Reply #3 on: December 31, 2016, 01:51:28 PM »
This is what is in the editor C:\WINN\NOTEPAD.EXE. all caps and it is locked and I cannot edit it. Any suggestions? Thanks

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: G code editor
« Reply #4 on: December 31, 2016, 04:19:22 PM »
Does the "browse" button work?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html