Hello Guest it is March 29, 2024, 03:32:51 AM

Author Topic: 2010 screen set  (Read 8596 times)

0 Members and 1 Guest are viewing this topic.

Re: 2010 screen set
« Reply #10 on: November 16, 2015, 10:08:03 AM »
Hi,

I have ignore m6 call checked on, but whenever it encounters one in my code its still calling for a tool change.

I'm just wondering if its how Bodcad posts out its code?
Here is the last tidbit of code...newbie here so not sure if m6 is the same as m06 ??

N104 Z1.
N105 G53 G0 Z-0.5
N106 G53 X4.5 Y14
N107 G90
N108 T1 M06

(END OF FILE)
N109 M30

(END OF PROGRAM)
%

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: 2010 screen set
« Reply #11 on: November 16, 2015, 10:51:19 AM »
Yes, M6 is the same as M06.
Your g-code has a tool change in it.

If you don't want Mach3 to stop at all, go to General Config and select "Ignore Tool Change".

The Ignore M6 in the screenset just stops it from zeroing the tool, but it will still stop at all M6's.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html