Hello Guest it is March 28, 2024, 04:52:56 PM

Author Topic: Screen design problem  (Read 2954 times)

0 Members and 1 Guest are viewing this topic.

Screen design problem
« on: March 19, 2015, 09:35:50 PM »
Hi all
I've modified my mach3 screen so it's just as I wanted it but...... Everything works except the movement arrows don't do anything.

At the start of the redesign they were working..... What could I have done to screw this up??

Thanks Dave

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Screen design problem
« Reply #1 on: March 19, 2015, 09:38:11 PM »
You need to have a Jog On/Off button on the page for them to work.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Screen design problem
« Reply #2 on: March 19, 2015, 11:01:02 PM »
Thanks for that. I'll have a look tonight.