Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: nzlowie on March 19, 2015, 09:35:50 PM

Title: Screen design problem
Post by: nzlowie on March 19, 2015, 09:35:50 PM

Hi all
I've modified my mach3 screen so it's just as I wanted it but...... Everything works except the movement arrows don't do anything.

At the start of the redesign they were working..... What could I have done to screw this up??

Thanks Dave

Title: Re: Screen design problem
Post by: ger21 on March 19, 2015, 09:38:11 PM

You need to have a Jog On/Off button on the page for them to work.

Title: Re: Screen design problem
Post by: nzlowie on March 19, 2015, 11:01:02 PM

Thanks for that. I'll have a look tonight.