Hello Guest it is March 28, 2024, 06:47:55 PM

Author Topic: speed control when cutting! please to help!  (Read 2007 times)

0 Members and 1 Guest are viewing this topic.

speed control when cutting! please to help!
« on: February 05, 2015, 01:33:40 PM »
Hello people..

I would to ask how I can control the speed motors when my machine is cutting? Its go so slowly when cutting..

thanks so much

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: speed control when cutting! please to help!
« Reply #1 on: February 05, 2015, 01:59:13 PM »
The F word controls the feedrate, for example G1 X100 F100 will move the X axis to the position of 100 at  a feedrate of 100 units per minute.
Hood
Re: speed control when cutting! please to help!
« Reply #2 on: February 05, 2015, 02:38:48 PM »
Thanks you so much Hood..
Can you please help me to setup my velocity and acceleration for my machine? It's so complicated!! I dont like my setup! Can please give some ideas?