Hello
Guest
it is
April 25, 2024, 08:02:48 AM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
G-Code, CAD, and CAM
/
G-Code, CAD, and CAM discussions
/
home individual axes from gcode or macro?
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: home individual axes from gcode or macro? (Read 2395 times)
0 Members and 1 Guest are viewing this topic.
moorea21
228
home individual axes from gcode or macro?
«
on:
January 27, 2015, 10:16:28 AM »
Can I home just 1 axis from from gcode or a macro? Or am I limited to zeroing all axes at once?
Logged
BR549
6,965
Re: home individual axes from gcode or macro?
«
Reply #1 on:
January 27, 2015, 11:41:50 AM »
G28.1 Z0 Homes Z
G28.1 X0 Homes X
etc
etc
Logged
moorea21
228
Re: home individual axes from gcode or macro?
«
Reply #2 on:
January 27, 2015, 11:54:57 AM »
Thanks loads, I couldn't work that out from the manual.
Logged
Overloaded
4,922
Re: home individual axes from gcode or macro?
«
Reply #3 on:
January 27, 2015, 12:15:56 PM »
There's a lot of good info under this little button that might not be in the manuals.
Logged
moorea21
228
Re: home individual axes from gcode or macro?
«
Reply #4 on:
January 27, 2015, 01:29:22 PM »
I didnt know about that, thanks.
Logged
Print
Pages:
1
Go Up
« previous
next »