Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: moorea21 on January 27, 2015, 10:16:28 AM

Title: home individual axes from gcode or macro?
Post by: moorea21 on January 27, 2015, 10:16:28 AM

Can I home just 1 axis from from gcode or a macro? Or am I limited to zeroing all axes at once?

Title: Re: home individual axes from gcode or macro?
Post by: BR549 on January 27, 2015, 11:41:50 AM

G28.1 Z0       Homes Z
G28.1 X0       Homes X
etc
etc

Title: Re: home individual axes from gcode or macro?
Post by: moorea21 on January 27, 2015, 11:54:57 AM

Thanks loads, I couldn't work that out from the manual.

Title: Re: home individual axes from gcode or macro?
Post by: Overloaded on January 27, 2015, 12:15:56 PM

There's a lot of good info under this little button that might not be in the manuals. :)

Title: Re: home individual axes from gcode or macro?
Post by: moorea21 on January 27, 2015, 01:29:22 PM

I didnt know about that, thanks.