great,
what is foxing me is there doesn't seem to be a pin out step and dir +/- diagram for the ess, does that mean I simply 'have' to use
http://www.aquickcnc.com/store/3-axis-unipolar-cnc-controller/does that also mean that the limit switches are on the controller and not the ess, so its impossible without, not knocking it am just unfamiliar with it
I 'suppose' I do like the fact that its all together on the one board with a single power input for motors
are the chips similar to a tb6600?
does it want a 5v feed and the motor feed @ 36v
are the connectors to the right for limit switches
why then is it not bundled with the ess?
I don't need spindle controll or anything bar limits
are they making a single output 36 volt 10 amp psu - ar a psu that has both 5v and 36 v capability
hmmm
I have loads of server 5v psu's - the little ones, and loads of fans 5v
so I suppose all you need is the ess, that driver board a little 5v power unit and a 36v 10 psu in the box = box can be ereal small = like that.
also whilst on, I take it a cat5 cable simply can't supply the 5v for it and the limit switches?