Yes, positively. I did make an error in reporting. It is the A axis which has an issue. All was fine and then we changed stepper drives. That is when the issue surfaced. Just t to eliminate the drive as the ghost we re-installed the old drives . . . same issue. We swapped switches . . . same issue. We swapped computers . . . same issue. We rerouted the BOB . . . same issue.
The debounce was set at zero and changing it to 2000 seems to have solved the RESET issue. However, the A axis home-off is in error and the field in the home screen changes to match the error number. For example, if 1.00 is set and the resulting offset is .950 then the 1.00 is automatically changed in the home screen to .950 inches
We have a number of scripts that rely on machine zero to sync with other offset movements. Therefor it is important that all zeros actually represent zero.