Hello Guest it is March 29, 2024, 09:23:24 AM

Author Topic: Mach 3 and saving DRO's on power loss/power down  (Read 2915 times)

0 Members and 1 Guest are viewing this topic.

Mach 3 and saving DRO's on power loss/power down
« on: December 29, 2014, 11:23:24 PM »
This question has probably been asked, but is there a setting that will save/remember values in the DRO's on a power loss, reboot or program shutdown?

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Mach 3 and saving DRO's on power loss/power down
« Reply #1 on: December 30, 2014, 12:40:50 AM »
Mach3 saves settings on shutdown so there is nothing to save settings on a power loss . A UPS will help IF mach3 AND the machine run off the UPS. You must of course stop and shut down Mach3 as soon as possible.

There is a General config setting to save DROs on shutdown as well as fixture settings.

(;-) TP
Re: Mach 3 and saving DRO's on power loss/power down
« Reply #2 on: December 30, 2014, 09:00:22 PM »
Is that the persistent DRO's checkbox?