Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: RC-CnC on December 29, 2014, 11:23:24 PM
-
This question has probably been asked, but is there a setting that will save/remember values in the DRO's on a power loss, reboot or program shutdown?
-
Mach3 saves settings on shutdown so there is nothing to save settings on a power loss . A UPS will help IF mach3 AND the machine run off the UPS. You must of course stop and shut down Mach3 as soon as possible.
There is a General config setting to save DROs on shutdown as well as fixture settings.
(;-) TP
-
Is that the persistent DRO's checkbox?