I am not sure what your issue is, but i have read several posts on ref all and many seem to be confusing. on my machine once i move the all axis to my machine zero position and hit ref all, it seems i cannot reset using the ref all button again. I have read several posts that indicate you can jog to a location and hit ref all and a new machine zero coordinate will be set. this does not work on my machine. There must be some condition that must be cleared, or changed to reset the machine zero.
Does anyone have an explanation.
Also i have never been able to find a good explanation of the to go button, i saw it explained as it indicates the distance to go. What distance to go where?? and what happens when you press it? I also saw a post saying you can set several to go locations ?? how and to where.
Also my machine does not move when you hit Ref all, and as i stated in only seems to work once just after starting a new profile it zeros the machine at a the current location but it does not move it if i jog to a new location and hit ref all nothing happens. no zeroing of dro's and no axis movement.