Hello, I am Diego, this is my firt post.
I am testing BobCAD with Mach3 plasma profile on a oxygen torch cutting table. I installed postprocessor "Mach_3_Plasma_Metric_Rev1.MillPst" from BobCAD web site. BobCAD is v24 and setting as plasma machine.
My output 1 is a reley for oxygen electrovalve. Works ok, i test writeing M03 and M05.
The problem is the gcode. when it should turn ON or OFF the reley the gcode set M05 ... always.
What i am doig wrong ? how can i set mach3 for turn ON and OFF the reley ?
Other problem. With postprocessor "Mach_3_Plasma_Metric_Rev1.MillPst" gcode has not FEEDRATE parameters ... no matter what feedrate set for plasma. But it works well with the "Mach_3_Mill_No_ATC_Metric_Rev2.MillPst"
I need help please!
Thanks.
Diego