Hello people. I need help now with wiring my ATC spindle. I will try to describe the problem. So, I have Chinese clone of HSD ES 919 ATC spindle. Now I'm trying to connect it to CS lab controller. I have the toolchange sample macro downloaded from CS lab site. In Macro I can see the folowing settings:
------------------------------------------------------------------------------
' Digital outputs CONFIG
'------------------------------------------------------------------------------
Const OUT_OPENCOLLET = 10 ' open collet CSMIO output
Const OUT_CLEANCONE = 11 ' cone cleaning CSMIO output
Const OUT_CURTAIN = 12 ' raise curtain CSMIO output
'------------------------------------------------------------------------------
' Digital inputs CONFIG
'------------------------------------------------------------------------------
Const IN_COLLETCLOSED = 20 ' collet locked sensor CSMIO input
Const IN_COLLETOPENED = 21 ' collet open sensor CSMIO input
Const IN_TOOLINSIDE = 22 ' tool locked sensor CSMIO input
My problem is input settings: I have only 2 sensors on my spindle S1(lock of tool) and S2(popup of tool). As I understand, my sensors are COLLETCLOSED and COLLETOPENED. What should I do with TOOLINSIDE? Thanks.