Hello Guest it is March 28, 2024, 08:34:45 AM

Author Topic: CSMIO/IP-S vs DELTA ASDA-B2  (Read 27878 times)

0 Members and 1 Guest are viewing this topic.

Offline Arman

*
  •  20 20
    • View Profile
CSMIO/IP-S vs DELTA ASDA-B2
« on: November 14, 2014, 04:13:14 AM »
Hello to everyone. First of all sorry for my English, I am from Armenia...

I need some help. I have CSMIO/IP-S v2 and servos from Delta. I wired all using the sample scetch from CS-Lab site. The problem is I can not run the servos from Mach3. Can anybody help me with proper settings of Mach3 and CSMIO/IP plugin to make servos to run. Thanks in advance.

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: CSMIO/IP-S vs DELTA ASDA-B2
« Reply #1 on: November 14, 2014, 06:11:55 AM »
Hi,

have you set in Output aeria Enable1 to port 10 pin 0 ? That is your enable for the drives.
are your positions chaning in mach3 if you try to move in manual ?
are you able to clear the reset button ?

Thomas
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Arman

*
  •  20 20
    • View Profile
Re: CSMIO/IP-S vs DELTA ASDA-B2
« Reply #2 on: November 14, 2014, 06:25:08 AM »
Hello Thomas. Thanks for reply. Here is what I set for X axis.

Mach3
Motor Outputs -> X axis Enabled
Input Signals -> Estop Enabled port10 pin2
Output Signals -> Enable1 port10 pin0

In Plugin -> Spetial function tab -> Misc IO

Servodrive Reset Enabled -> Output 2

When I press Reset in Mach3, servo goes to hold, and thats OK. When manual jog - mach3 showes move in X, but servo shaft don't rotating

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: CSMIO/IP-S vs DELTA ASDA-B2
« Reply #3 on: November 14, 2014, 06:36:20 AM »
Hi,

drives are set to position control mode and right signals for pulse an dir ?

i am not so familiar with the delta drives, never had one.

Thomas
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Arman

*
  •  20 20
    • View Profile
Re: CSMIO/IP-S vs DELTA ASDA-B2
« Reply #4 on: November 14, 2014, 06:46:31 AM »
Yes, drives are set to position control by default...

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: CSMIO/IP-S vs DELTA ASDA-B2
« Reply #5 on: November 14, 2014, 06:52:10 AM »
Hi,

had a quick look to the delta manual.
for my understanding P1-00 should be :    1042

Thomas
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Arman

*
  •  20 20
    • View Profile
Re: CSMIO/IP-S vs DELTA ASDA-B2
« Reply #6 on: November 14, 2014, 06:56:40 AM »
let me to check it

Offline Arman

*
  •  20 20
    • View Profile
Re: CSMIO/IP-S vs DELTA ASDA-B2
« Reply #7 on: November 14, 2014, 07:03:39 AM »
It works Thomas... Thank you so much, I am breaking my brains second day...

I am building 5 axis big cnc machine, will drive it with 6 servos, and ATC spindle, if I need more help with settings I will ask your help here. Thank you again...

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: CSMIO/IP-S vs DELTA ASDA-B2
« Reply #8 on: November 14, 2014, 02:08:00 PM »
Would like to see some pics of that machine ;)
Hood

Offline Arman

*
  •  20 20
    • View Profile
Re: CSMIO/IP-S vs DELTA ASDA-B2
« Reply #9 on: November 14, 2014, 02:53:02 PM »
I should post pics here?