Hello Guest it is March 28, 2024, 05:33:48 AM

Author Topic: Old version download  (Read 5285 times)

0 Members and 1 Guest are viewing this topic.

Old version download
« on: September 19, 2014, 10:15:38 AM »
Hi
I have the latest versionMach3 ...66 and the Turn module is not working properly on threading.  I have seen quite a few posts on this subject and it seesm that an earlier version will resolve this problem.  My  question is; where can I download an earlier version of Mach3?  I have tried the download page and can only see the latest versions listed.

Regards

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Old version download
« Reply #1 on: September 19, 2014, 08:06:36 PM »
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Old version download
« Reply #2 on: September 20, 2014, 03:53:22 AM »
Ok I tried the ftp link this morning and it failed ::), guess it might be down so I will try later.  If in the meantime you could check the sites is up and running I would appreciate it.
Thanks

Offline ZASto

*
  •  423 423
    • View Profile
Re: Old version download
« Reply #3 on: September 20, 2014, 05:10:21 AM »
Delete the http:// part from the posted link.
Make no mistake between my personality and my attitude.
My personality is who I am.
My attitude depends on who you are.

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Old version download
« Reply #4 on: September 20, 2014, 09:39:54 AM »
Right you are Zasto, my bad.

ftp://anonymous:guest@machsupport.com/
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Old version download
« Reply #5 on: September 22, 2014, 04:57:14 AM »
Nope, still can't get to this ftp site!
Can you check it please?
Might be something this end. :(
Re: Old version download
« Reply #6 on: September 22, 2014, 04:58:22 AM »
Ok, it works :-)
Thanks