Hello Guest it is March 28, 2024, 01:57:19 PM

Author Topic: Point to Point  (Read 1644 times)

0 Members and 1 Guest are viewing this topic.

Point to Point
« on: August 29, 2014, 08:54:40 PM »
My milling machine is a 3 axis striaght point to point using one drive through clutches to position each axis. Using the same arrangement with Mach 3 what would I need to complete and how would I get feedback from each axis linear encoder for positioning using one drive and servo motor from Applied Motion or similar. Each of the axis are driven by Acme screws.