Hello Guest it is December 05, 2023, 12:47:39 AM

Author Topic: Screen Error with turn wizard  (Read 1808 times)

0 Members and 1 Guest are viewing this topic.

Screen Error with turn wizard
« on: August 28, 2014, 03:09:18 PM »
I am working on setting up a new machine(still working on it), while trying to learn mach3. Running in demo mode on my home PC not hooked up to a machine. When I load the turn wizard, I get the following error with the wizard where the buttons at the bottom are cut off on the screen regardless of what I do to try to move it.

Here is a screenshot.


The error replicates on the computer for the machine as well as not being able to adjust it....in fact it cuts it off more where I barely can see the buttons.

The turn wizards are a big reason I am considering mach3 to run the machines, but I can't figure this out.

I am sure its something easy I am missing thats simple....any help would be great.

Offline Hood

  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Screen Error with turn wizard
« Reply #1 on: August 31, 2014, 04:30:40 AM »
Probably best to ask on the Turn Wizard section of the forum as Ron will see it. http://www.machsupport.com/forum/index.php/board,3.0.html