Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: EddieO on August 28, 2014, 03:09:18 PM
-
I am working on setting up a new machine(still working on it), while trying to learn mach3. Running in demo mode on my home PC not hooked up to a machine. When I load the turn wizard, I get the following error with the wizard where the buttons at the bottom are cut off on the screen regardless of what I do to try to move it.
Here is a screenshot.
http://s617.photobucket.com/user/eddiejulie/media/screenshot2_zpsffa81736.jpg.html?sort=3&o=0
The error replicates on the computer for the machine as well as not being able to adjust it....in fact it cuts it off more where I barely can see the buttons.
The turn wizards are a big reason I am considering mach3 to run the machines, but I can't figure this out.
I am sure its something easy I am missing thats simple....any help would be great.
-
Probably best to ask on the Turn Wizard section of the forum as Ron will see it. http://www.machsupport.com/forum/index.php/board,3.0.html
Hood