Hello Guest it is September 30, 2020, 12:02:27 AM

Author Topic: Mobile CNC Router (Home Made)  (Read 3699 times)

0 Members and 1 Guest are viewing this topic.

Mobile CNC Router (Home Made)
« on: May 29, 2014, 08:48:02 PM »
I just ran my first project with this machine that I built specifically for Raster Carving. I put together an image using Gimp software, opened it up on my LinuxCNC computer to create G-code, then put the code on my Win XP computer running Mach3 and Raster carved it with my mobile router that I put together with parts from Inventables.com and buildyourcnc.com.

Here's the video: https://www.youtube.com/watch?v=UOeXTPZMJJE

And the other one: https://www.youtube.com/watch?v=vJb0dKbvF5Q

Offline Tweakie.CNC

  • *
  •  8,458 8,458
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Mobile CNC Router (Home Made)
« Reply #1 on: May 30, 2014, 03:18:25 AM »
Brilliant work Artcarver - my congratulations on the construction of your machine which is quite inspirational.  8)


Offline Chaoticone

  • *
  •  5,628 5,628
  • Precision Chaos
    • View Profile
Re: Mobile CNC Router (Home Made)
« Reply #2 on: May 30, 2014, 03:32:17 AM »
I give this a 10 for originality.  :) Neat!

;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Mobile CNC Router (Home Made)
« Reply #3 on: May 30, 2014, 09:30:17 AM »
As the new Mach4 is going to come out I'll be looking for ways to turn raster images into G-code and constantly trying to get the machine to go faster and faster. I'll probably be looking for compatible drivers and USB boards to get it faster.