Machsupport Forum
*****VIDEOS***** => *****VIDEOS***** => Topic started by: artcarver on May 29, 2014, 08:48:02 PM
-
I just ran my first project with this machine that I built specifically for Raster Carving. I put together an image using Gimp software, opened it up on my LinuxCNC computer to create G-code, then put the code on my Win XP computer running Mach3 and Raster carved it with my mobile router that I put together with parts from Inventables.com and buildyourcnc.com.
Here's the video: https://www.youtube.com/watch?v=UOeXTPZMJJE
And the other one: https://www.youtube.com/watch?v=vJb0dKbvF5Q
-
Brilliant work Artcarver - my congratulations on the construction of your machine which is quite inspirational. 8)
Tweakie.
-
I give this a 10 for originality. :) Neat!
Brett
-
As the new Mach4 is going to come out I'll be looking for ways to turn raster images into G-code and constantly trying to get the machine to go faster and faster. I'll probably be looking for compatible drivers and USB boards to get it faster.